Risers for Zion Display Cases

Slabster risers are tiered platforms that lift graded slabs to staggered heights inside a display case, so every card reads at a glance instead of disappearing behind the one in front of it.

Three designs, one job. Honeycomb uses a hex lattice and is the original. Faceted uses a geometric cut for a sharper, more angular look. Featherlite strips the profile down for the lightest set we make. All three fit PSA, BGS, SGC, and CGC slabs, and if PSA is all you collect, see everything we make sized for PSA cases.
Skip to results list
3 items

Filter

  • Top-down view of 24 black honeycomb risers in three columns inside a gray Zion display case

    Honeycomb Riser

    Honeycomb Riser

    Hex lattice

    $49.95
    $49.95
  • Top-down view of 24 black faceted risers in three columns inside a gray Zion display case

    Faceted Riser

    Faceted Riser

    Geometric cut

    $59.95
    $59.95
  • Top-down view of 24 black Featherlite risers with an open lattice pattern inside a gray Zion display case

    Featherlite Riser

    Featherlite Riser

    Cubed lattice

    $39.95
    $39.95

SIZING

Riser Compatibility

Risers seat flat against the case floor and hold each slab or toploader at an angle. Use this to figure out which design you want and how many you need.

Fits PSA, BGS, SGC, and CGC standard slabs, plus thick, multi-card, and memorabilia slabs, toploaders, and semi-rigids.

  • Honeycomb

    22g per riser20.3mm

    Hex lattice

    The original. Our most popular set.

  • Faceted

    32g per riser25.1mm

    Geometric cut

    Sharper, more angular look

  • Featherlite

    16g per riser19.3mm

    Cubed lattice

    Thinnest profile under the slab. Our lightest set.

How many risers per case

Case Grid Risers
Zion vertical, standard 8 x 3 24
Zion horizontal, standard 6 x 4 24

Riser channel: fits slabs up to 9 mm thick. Standard graded slabs run about 6 mm. If your slab is thicker than this, it will not seat.

FAQ

Common Questions

Do Slabster risers fit Zion display cases?

Yes. Our risers are dimensioned specifically for Zion display cases and seat flat against the case floor with a snug side-to-side fit.

What is the difference between the honeycomb, faceted, and Featherlite risers?

All three do the same job and fit the same cases. Honeycomb uses a hex lattice and is the original design. Faceted uses a geometric cut for a sharper look. Featherlite uses the least material, so it is the lightest set we make and puts less riser under the slab. Pick on looks, not function.

Which graded slabs do the risers hold?

PSA, BGS, SGC, and CGC standard slabs all seat in the riser channel. Thicker multi-card and memorabilia slabs may not fit.

How many risers do I need for one case?

A standard horizontal Zion case takes 24 risers in a 6 by 4 grid. See the sizing table above for other case sizes.

Do all the risers in a set come in the same color?

Yes. Each set ships in a single color. If you want a mix, order separate sets.

What are the risers made of?

Matte PLA, printed to order on our own Bambu Lab print farm in Delaware.

Can I use these outside a Zion case?

They are dimensioned for Zion cases, but they work on any flat shelf or surface where you want slabs held at an angle. Fit inside other brands of case is not guaranteed.

Is Slabster affiliated with Zion Cases?

No. Slabster is an independent accessory manufacturer. Zion is referenced only to describe case compatibility.